205
Troubleshooting
The device is not working:
- Check that all connections are connected correctly�
- Check for a burned fuse�
No audio
- Check that the loudspeakers are connected correctly�
The device has "frozen”
- Turn off the device and restart it or disconnect it from the power
supply and reconnect it�
The device does not respond to any button pressing
- Turn off the device and restart it or disconnect it from the power
supply and reconnect it�
Weak reception or unavailable radio signal
- Check whether the antenna is connected and the quality
connection cable is not interrupted�
- The antenna is not long enough� Extend the length of the
antenna�
- The antenna is not thoroughly grounded� Thoroughly ground the
antenna�
No stereo signal reception
- Tune exactly to the required frequency�
- The signal is too weak, set to the MONO mode�
To Next Page
Loading...
