ALIGNMENT OF THE DOORS
12. Ali
n the upper door with the lower so that
there is a parallel
ap between the doors and
around the frame. Ad
ust the doors to the cabi-
net so the
askets seal but do not bind.
Ti
hten the screws holdin
the hin
e brackets
in place.
13. Door Seal: The door seal can be checked b
closin
the door on a 1" x 6" strip of paper. A
sli
ht dra
should be noticed when the paper is
pulled out from between the
asket and the
cabinet. Repeat the process around all four
sides of the door. If the door does not seal
properl
, read
ust the hin
e brackets.
14. Position the travel latches so that the
secure
the doors when closed but does not prevent
the doors from closin
properl
. Ti
hten the
two screws in each travel latch.
15. Replace the
uice rack and stora
e bins into
the door. Make sure that the milk bins
wider
stora
e bins
are installed in the lowest door
position.
Fi
ure 18
Fi
ure 19
A: Top Hin
e B: Bottom Hin
e
C: Middle Hin
e D: Middle Hin
e
13
To Next Page
Loading...
