Need help?Do you have a question about the Nord Drivesystems NORDAC FLEX SK 205E Series and is the answer not in the manual?
General| Series | NORDAC FLEX SK 205E |
|---|---|
| Category | Inverter |
| Protection Class | IP20 |
| Braking Resistor | Optional |
| Power Range | 0.25 to 22 kW |
| Input Voltage | 3 × 380 – 480 V |
| Output Voltage | Three-phase 0 to input voltage |
| Control Mode | V/f control, vector control |
| Communication Interfaces | RS485, CANopen, PROFIBUS |
| Frequency Range | 0 to 600 Hz |
| Cooling Method | Natural convection |
| Ambient Temperature Range | -10 °C to +40 °C |
| Storage Temperature Range | -25 °C to +70 °C |
| Relative Humidity | 95% (non-condensing) |
| Installation Altitude | Up to 1000 m |
To Next Page
