Need help?Do you have a question about the Nord Drivesystems NORDAC FLEX SK 215E Series and is the answer not in the manual?
General| Series | NORDAC FLEX SK 215E |
|---|---|
| Category | Inverter |
| Control Method | Sensorless vector control, V/f control |
| Relative Humidity | 5 - 95 % (non-condensing) |
| Altitude | Up to 1000 m above sea level |
| Braking Resistor | Optional |
| Output Voltage | 0-480 V AC |
| Communication Interfaces | CANopen, PROFIBUS, Ethernet |
| Protection Class | IP20 |
| Ambient Temperature Range | -10°C to +50°C |
| Storage Temperature Range | -25 °C to +70 °C |
| Power Range | 0.25 to 22 kW |
| Operating Temperature | -10 °C to +40 °C (standard), -10 °C to +50 °C (with derating) |
Provides a general overview of the NORDAC FLEX product family and its basic properties.
Covers essential safety instructions, general precautions, and requirements for qualified personnel.
Details warning symbols and hazard information used on the product and within the document.
Describes how to mount devices on a motor terminal box or in its vicinity.
Explains the use of internal or external braking resistors to avoid device shutdown due to overvoltage.
Provides information on connecting the device, including warnings and terminal assignments.
Covers safety warnings and conditions for operation in ATEX and EAC Ex environments.
Details available control options like switches, potentiometers, and parametrisation boxes/software.
Explains how to select operating modes like VFC, CFC open-loop, and CFC closed-loop for motor control.
Covers the procedures for starting up the device, including connection and configuration steps.
Details the function, setting value, and notes for various device parameters.
Describes fundamental parameters for device setup, including acceleration, deceleration, and braking times.
Details motor data and characteristic curves for various motor types and operating modes.
Explains speed control methods using encoders and parameters for servo mode.
Lists and explains error and warning messages with their possible causes and remedies.
Lists detailed electrical data for frequency inverters across various voltage and power ratings.
Covers EMC directive requirements, technical documentation, and type test certificates.
Presents characteristic curves for motor operation at 50 Hz, 87 Hz, and 100 Hz.
To Next Page
