Nord Drivesystems SK PAR-3E - Assignment of Parameterisation Box - Frequency Inverter

2 Parameter Boxes – Accessories
BU 0040 GB-1611 Subject to technical alterations 41
2.5.2.2 Assignment of parameterisation box - frequency inverter
ParameterBox ParameterBox SimpleBox
SK PAR-2E SK PAR-2H SK PAR-3H SK PAR-3E
SK CSX-3H
SK CSX-3E
Frequency inverter
Interface
RS485 RS485
RS485 /
RS232 (USB)
RS485 RS485
SK 200E
1* 2* 1 1 1
SK TI4-TU-BUS
(BUS connection unit)
1 2 1 1 Not possible
SK 300E
Wiring to
connection
terminals,
4-lead
Direct
connection
with system
plug
3 3 3
SK 500E
1 2 1 1 1
SK 700E
>22KW
or with option -RS2
1** 2** 1** 1** 1**
SK 700E
with customer interface
SK CU1-STD
+
Wiring to
connection
terminals,
4-lead
4 Not possible Not possible Not possible
SK 750E
Not possible
Direct
connection
with system
plug
3 3 3
SK 750E
with customer interface
SK CU1-STD
+
Wiring to
connection
terminals,
4-lead
Direct
connection
with system
plug
3 3 3
Vector mc
Wiring to
connection
terminals,
4-lead
4 Not possible Not possible Not possible
Nord Con
5 + 8 + 9 6 + 8 + 9 7 Not possible Not possible
* The ParameterBox series SK PAR-2x can only access the SK 200E after a modification to the hardware.
The launch of the modified ParameterBox series was in the 4th quarter of 2009.
** SK 700E < 30KW: safe operation is only ensured with an external power supply to the ParameterBoxes.
Further details of the SK PAR 2H can be found in Section 2.1.1.2
Connection variants