nord NORDAC SK 700E - Page 26

NORDAC SK 700E Operating Manual
26 Subject to technical alterations BU 0700 EN
Language selection, Summary
The following steps must be carried out to change the language used in the ParameterBox display.
The default setting is "German". After the mains supply is switched on, the following displays should appear (varies depending
upon output and options).
700E 3,0kW/3 POS STD
1
> NORDAC <
Frequenzumrichter
ONLINE FU P1 ESperre
Use the Selection keys or ,
to scroll to the “Optionen“ menu
1
Optionen
>ENTER<
ONLINE FU P1 ESperre
P1301
2
Sprache
Deutsch ...
ONLINE FU P1 ESperre
then press >ENTER<
Using the Values key ,
select the “Sprache“
Initial display
... English
... Français
... Espanol
... Sverige
... Nederlands
Nach Auswahl >ENTER< betätigen
P1301
2
Language
English (e.g.)
ONLINE FI P1 Locked
Press the SELECTION keys and
simultaneously
1
Options
>ENTER<
ONLINE FI P1 Locked
700E 3,0kW/3 POS STD
1
> NORDAC <
Frequency Inverter
ONLINE FI P1 Locked
Press the SELECTION keys and
simultaneously