24 | NORD STAGE 3 USER MANUAL OS V1.X
PIANO/CLAV EQ
PIANO EQ SETTINGS
Using the PIANO EQ section is a smart method for instantly altering the frequency content and
character of the currently selected piano sound - while keeping the Amp Sim/EQ effects unit free
for other tasks.
The SOFT setting will filter out much of the high frequency range, and emphasize parts of the low,
resulting in a subdued and mellow sound.
The MID mode de-emphasizes both high and low frequency ranges, making for a focused and
cutting sound with a prominent mid-range.
The BRIGHT mode emphasizes the high frequency range, producing a bright, brilliant sound
which is also useful for bringing out the “ping” in electric pianos.
CLAV EQ SETTINGS
An original Clavinet is equipped with 4 additional rocker switches, which control the onboard
EQ. Most of these settings combinations are available on the Nord Stage 3. Use the PIANO/CLAV
button to select your preferred combination of the filter settings.
LAYER DETUNE
If the Piano sections for Panel A and B are both active in a layer configuration, the LAYER DETUNE
feature can be used to detune the two piano sounds. There are three different degrees of detune,
1, 2 and 3, ranging from a subtle chorus-like effect to more extreme detuning.
M Layer Detune will only affect the piano sounds on Panel A and B – not other active sound
engines.
To Next Page
Loading...