What to do if the pedals slip on my NordicTrack 831.23887.0?
If the pedals on your NordicTrack Elliptical Trainer are slipping during use, it may be necessary to adjust the drive belt. First, turn the power switch off and unplug the power cord. Then, loosen the Idler Screw (97) and tighten the Idler Adjustment Screw (72) until the Drive Belt (46) is tight.
How to calibrate incline frame on NordicTrack Elliptical Trainer?
To address an incline frame that isn't functioning correctly on your NordicTrack Elliptical Trainer, press and hold the Calorie button for several seconds until the test mode appears on the display. Press the Calorie button again, and then press the Incline increase or decrease button to calibrate the incline frame.
Read all precautions and instructions before using the elliptical. Keep manual for future reference.
Read the manual carefully before use and familiarize yourself with the labeled parts.
Detailed instructions for assembling the elliptical, requiring two persons and specific tools.
Steps for plugging in power, moving, leveling, exercising, and dismounting the elliptical.
Instructions for folding and storing the elliptical, emphasizing the weight requirement.
Console diagram, features, power on, and changing console settings.
Instructions for Manual, Onboard, Set-a-Goal, and iFit workouts.
Regular inspection, cleaning, and troubleshooting for console, incline, and reed switch.
Recommendations for exercise intensity, duration, frequency, and warranty information.
General| Brand | NordicTrack |
|---|---|
| Model | 831.23887.0 |
| Category | Elliptical Trainer |
| Language | English |
To Next Page