18
to the incline and speed settings for the next
segment.
To stop the program, press the STOP button. The
time will begin to flash in the main display. To
restart the program, press the START button or the
SPEED + button. The walking belt will begin to
move at 1 mph. When the next segment of the pro-
gram begins, the INCLINE TRAINER will automati-
cally adjust to the incline and speed settings for the
next segment.
Follow your progress with the main display.
Refer to step 5 on page 15.
Measure your heart rate if desired.
Refer to step 6 on page 16.
When the program is completed, remove the
key.
Step onto the foot rails. Remove the key from the
console and put the key in a secure place.
When the INCLINE TRAINER is not in use, switch
the on/off circuit breaker near the power cord to
the off position and unplug the power cord.
6
5
4
To Next Page
Loading...
