To Next PageTo Next PageWhat to do if my NordicTrack C 970 Pro Treadmill power does not turn on?
If your NordicTrack Treadmill isn't powering on, ensure the power cord is plugged into a surge suppressor, which is then plugged into a grounded outlet. Also, verify that the key is properly inserted into the console. Finally, check the power switch; if it's tripped (protruding), wait five minutes before pressing it back in to reset.
Why does my NordicTrack C 970 Pro power turn off during use?
If your NordicTrack Treadmill shuts off during use, first check the power switch. Ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, try removing and reinserting the key from the console.
What to do if the walking belt slows when walked on NordicTrack C 970 Pro Treadmill?
If the walking belt on your NordicTrack Treadmill slows down when you walk on it: * If the walking belt is overtightened, remove the key and unplug the power cord. Use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn. * Your treadmill features a walking belt coated with high-performance lubricant. Never apply silicone spray or other substances to the walking belt or the walking platform unless instructed to do so by an authorized service representative.
How to fix a walking belt that is off-center or slips on NordicTrack C 970 Pro?
To correct an off-center or slipping walking belt on your NordicTrack Treadmill: * If the walking belt is off-center, first remove the key and unplug the power cord. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. * If the walking belt slips when walked on, first remove the key and unplug the power cord. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn.
What to do if NordicTrack Treadmill console displays remain lit after removing the key?
If the console displays on your NordicTrack Treadmill stay lit even after you remove the key, the treadmill might be in demo mode. To turn off the demo mode, hold down the Stop button for a few seconds.
General| Brand | NordicTrack |
|---|---|
| Model | C 970 Pro Treadmill |
| Category | Treadmill |
| Language | English |
Identifies locations of warning decals on the treadmill.
Lists essential safety rules and guidelines for treadmill usage.
Provides initial checks, part identification, and assembly overview.
Step-by-step instructions for assembling the treadmill.
Explains heart rate monitor usage and console diagram/features.
Covers power connection, manual mode, workouts, settings, and adjustments.
Instructions for folding, moving, and lowering the treadmill.
Provides solutions for common treadmill problems and issues.
Guidance on exercise intensity, training zones, and suggested stretches.
Lists parts, exploded drawings, and warranty details.
