To Next PageTo Next PageWhat to do if my NordicTrack C 1750 Pro Treadmill power turns off during use?
If your NordicTrack Treadmill's power turns off during use, try the following: First, if the switch has tripped, wait five minutes before pressing it back in. Next, ensure the power cord is securely plugged in. If it is, unplug it, wait five minutes, and then plug it back in. Finally, remove and reinsert the key from the console.
How to fix NordicTrack C 1750 Pro that won't turn on?
If your NordicTrack Treadmill doesn't turn on, ensure the power cord is plugged into a surge suppressor, and the surge suppressor is plugged into a properly grounded outlet. Also, make sure the key is inserted into the console. If the switch has tripped, wait five minutes, then press the switch back in to reset it.
What to do if NordicTrack Treadmill walking belt slips or is off-center?
If the walking belt on your NordicTrack Treadmill is off-center or slips when you walk on it, here’s what to do: If the belt has shifted left, use a hex key to turn the left idler roller screw clockwise 1/2 turn. If it has shifted right, turn the left idler roller screw counterclockwise 1/2 turn. If the belt slips, turn both idler roller screws clockwise 1/4 turn using the hex key.
How to turn off demo mode on NordicTrack C 1750 Pro?
If the console displays on your NordicTrack Treadmill remain lit even after you remove the key, the demo mode may be activated. To deactivate it, press and hold the Stop button for a few seconds.
General| Brand | NordicTrack |
|---|---|
| Model | C 1750 Pro Treadmill |
| Category | Treadmill |
| Language | English |
Proper procedure for connecting the power cord, including surge suppressor use and safety.
