S
skinnernathanAug 7, 2025
How to fix NordicTrack A2250 when power does not turn on?
- RRobert JohnsAug 7, 2025
First, ensure the power cord is properly plugged into a surge suppressor, and the surge suppressor is connected to a grounded outlet. Use a single-outlet surge suppressor meeting the specifications. Note that the treadmill isn't compatible with GFCI outlets. Also, verify that the key is fully inserted into the console after plugging in the power cord. Finally, check the reset/off circuit breaker on the treadmill frame near the power cord. If the switch protrudes, the breaker has tripped; wait five minutes, then press the switch to reset it.