B
Barbara DeleonAug 10, 2025
What to do if my NordicTrack APEX 6100 Treadmill turns off during use?
- JJeffrey JonesAug 10, 2025
If your NordicTrack Treadmill loses power during use, first check the circuit breaker located near the power cord. If tripped, wait five minutes, then reset it. Ensure the power cord is securely plugged in, and the on/off switch is in the 'on' position. Also, remove and reinsert the key into the console. If these steps don't resolve the issue, further assistance may be needed.







