12
Before operating the television, you must connect a 75 ohm CATV cable to the 75 ohm terminal on the
treadmill, a VCR or DVD player to the audio/video input jack, or a personal audio/video player to the
audio/video jack on the console.
Note: Use a CATV cable to connect to an external source such as a cable box,
analog cable, satellite TV box, or VCR. No CATV cable is included.
HOW TO CONNECT A 75 OHM CATV CABLE
1. Connect a 75 ohm
CATV cable to the 75
ohm terminal on the
treadmill frame near
the uprights.
HOW TO CONNECT AN EXTERNAL SOURCE
USING A CATV CABLE
1. Connect one end of a 75 ohm CATV cable to the 75
ohm output jack on your external source.
2. Plug in the power cord of your external source. See
your external source’s user’s manual for proper
grounding instructions.
3. Connect the 75 ohm CATV cable to the 75 ohm ter-
minal on the treadmill frame near the uprights.
HOW TO CONNECT A DVD PLAYER OR VCR
USING THE AUDIO/VIDEO INPUT JACK
1. Connect one end of an RCA component audio/video
cable to your DVD player or VCR.
2. Plug in the power cord of your DVD player or VCR.
See your DVD player or VCR user’s manual for
proper grounding instructions.
3. Connect the RCA component audio/video cable to
the audio/video input jack on the back of the
console.
HOW TO CONNECT A PERSONAL AUDIO/VIDEO
PLAYER DIRECTLY TO THE CONSOLE
See HOW TO USE THE STEREO SOUND SYSTEM
on page 24.
75 Ohm Terminal
75 Ohm CATV Cable
To Next Page
Loading...
Need help?
General
