NordicTrack C950i User Manual

10
2. Make sure that the power cord is unplugged.
Next, remove the tie securing the Upright Wire
(81) to the front of the Base (94).
Identify the Right Upright (90). Have a second
person hold the Right Upright near the Base (94).
See the inset drawing. Tie the wire tie (A) in the
Right Upright (90) securely around the end of the
Upright Wire (81). Then, insert the Upright Wire
into the lower end of the Right Upright as you
pull the other end of the wire tie out of the Right
Upright.
94
94
90
90
D
C
B
81
10
90
2
81
A
A
77
3. Lay the Right Upright (90) near the Base (94).
Press the Grommet (77) into the square hole (B)
in the Right Upright. Make sure not to pinch
the ground wire (C).
Next, remove and discard the indicated screw (D).
Then, attach the ground wire to the Right Upright
(90) with a #8 x 1/2" Silver Screw (10).
3

NordicTrack C950i Specifications

General

Motor	3.0 CHP
Folding	Yes
Decline	No
iFit Compatibility	Yes
Cooling Fan	Yes
Speakers	Yes
Speed	0 – 12 MPH
Display	7" Backlit Display
Weight Capacity	300 lbs
Incline	0-12%
Running Surface	20" x 60" Tread Belt
Programs	32 Built-in Programs