NordicTrack E 11.6 NTEVEL99813.0 - Ramp Mechanism and Cover Installation

11
10
10. Orient the Ramp Cover (44) around the Upright
(5) as shown.
Press the mounts on the underside of the Ramp
Cover (44) into the Ramp (43).
9
43
12
12
136
92
44
43
9. See the upper drawing. Locate the Ramp
Roller (92) on the Right Pedal Arm (12).
Set the Ramp Roller (92) on the right side of the
Ramp (43).
See the lower drawing. Pull upward on the
Latch (117) on the Right Pedal Arm (12).
Press the Right Pedal Arm (12) onto the right
Sleeve (136). Make sure that the Right Pedal
Arm latches into place.
Repeat this step on the other side of the
elliptical.
117
5