13
16. Attach the Rear Upright Cover (25) around the
Upright (5) by pressing the tabs on the Rear
Upright Cover into the Front Upright Cover (24).
See HOW TO PLUG IN THE POWER CORD
on page 15 and plug the power cord into the
receptacle on the frame of the elliptical exer-
ciser. Then, attach the adapter to the power
cord, if necessary.
24
25
5
16
17. Make sure that all parts of the elliptical are properly tightened. Note: Some hardware may be left over
after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical.
15. Attach the Front Upright Cover (24) to the
Upright (5) with four M4 x 16mm Screws (106).
24
106
15
5
To Next Page
Loading...
