NordicTrack E 8.2 Elliptical - Page 10

10
9
7
4
63
128
110
9. Untie and discard the wire tie on the Upper
Wire (110).
While a second person holds the Console
(7) near the Upright (4), connect the wires on
the Console to the Upper Wire (110), to the
Extension Wire (128), and to the Sensor
Wires (63).
Insert the excess wire into the Upright (4) or into
the Console (7).
10
Avoid pinching
the wires
7
10. Tip: Avoid pinching the wires. Attach the
Console (7) to the Upright (4) with four M4 x
16mm Screws (101).
101
101
4