27
An information box will ask if you want to connect
to the wireless network. Touch Connect to connect
to the network or touch Cancel to return to the list
of networks. If the network has a password, touch
the password entry box. A keyboard will appear on
the screen. To view the password as you type it,
touch the Show Password checkbox.
To use the keyboard, see HOW TO USE THE
TOUCH SCREEN on page 20.
When the console is connected to your wireless
network, a checkmark will appear next to the wire-
less network name. Then, touch the back arrow on
the screen to return to the wireless network menu.
To disconnect from a wireless network, touch and
hold the name of the wireless network and then
touch Forget Network.
If you are having problems connecting to an
encrypted network, make sure that your password
is correct. Note: Passwords are case-sensitive.
Note: The console supports unsecured and
secured (WEP, WPA™, and WPA2™) encryption.
A broadband connection is recommended; perfor-
mance depends on connection speed.
Note: If you have questions after following
these instructions, go to support.iFit.com for
assistance.
5. Exit the wireless network menu.
To exit the wireless network menu, touch the back
arrow on the screen.
HOW TO USE THE SOUND SYSTEM
You can use any Bluetooth-enabled personal audio
device to play music or audio books through the
console sound system while you exercise.
1. Make sure your device’s Bluetooth setting
is turned on, and place or hold it near the
console.
2. Press and hold the Bluetooth Audio button on
the console’s speaker grill for 3 seconds.
A tone will sound and the
Bluetooth button will begin
flashing to indicate that the
console has entered pairing
mode.
3. Pair your device to the console.
Once your device and the console pair success-
fully, the audio from your device will play through
the console’s speakers.
Note: The console can save eight devices in its
memory. If you have previously paired your device
to the console, you can simply press the Bluetooth
Audio button to connect your device to the console.
4. Adjust the volume as desired.
You can adjust the
volume level using
the volume buttons
on the console or the
volume control on your
personal audio device.
5. Erase the console’s device memory if
necessary.
If you need to erase all the Bluetooth-enabled
devices saved in the console’s memory, press and
hold the Bluetooth Audio button for 10 seconds.
To Next Page
Loading...
