EasyManua.ls Logo

NordicTrack NTL16119.1 - User Manual

NordicTrack NTL16119.1
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
nordictrack.com
Model No. NTL16119.1
Serial No.
Write the serial number in the space
above for reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
To register your product and
activate your warranty today,
go to my.nordictrack.com.
For service at any time, go to
nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.–Fri. 6 a.m.–6 p.m. MT
Sat. 8 a.m.–12 p.m. MT
Please do not contact the store.
ACTIVATE YOUR
WARRANTY
CUSTOMER CARE
Serial
Number
Decal
USER'S MANUAL

Table of Contents

Questions and Answers

  • J
    Jessica PorterAug 16, 2025
    What to do if NordicTrack NTL16119.1 Treadmill power does not turn on?
    • N
      nelsonrubenAug 16, 2025
      First, ensure the power cord is securely plugged into both a surge suppressor and a properly grounded outlet. If you're using an AFCI-equipped outlet and the circuit breaker trips, consider purchasing an arc filter (see the front cover of this manual). Also, verify that the key is correctly inserted into the console. Finally, check the power switch on the treadmill frame; if it's tripped (protruding), wait five minutes before pressing it back in to reset it.
  • A
    Andrew BeardAug 19, 2025
    Why does my NordicTrack NTL16119.1 Treadmill power turn off during use?
    • N
      Nathan KnightAug 19, 2025
      If your treadmill shuts off unexpectedly, start by checking the power switch to see if it has tripped; if so, wait five minutes, then press it back in. Next, ensure the power cord is properly plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, try removing and reinserting the key from the console. If these steps don't resolve the issue, please see the front cover of this manual.
  • J
    James ArmstrongAug 22, 2025
    What to do if my NordicTrack NTL16119.1 Treadmill power does not turn on?
    • C
      Christopher TravisAug 22, 2025
      First, ensure the power cord is correctly plugged into a surge suppressor, and the surge suppressor is plugged into a grounded outlet. Then, verify the key is fully inserted into the console. Also, check the power switch. If it protrudes, wait five minutes, then press it back in to reset it. If your treadmill is connected to an AFCI-equipped outlet and the circuit breaker trips repeatedly, you may need to purchase an arc filter.
  • K
    Kristin RamseyAug 26, 2025
    What to do if NordicTrack Treadmill displays of the console do not function properly?
    • C
      cindycaseyAug 26, 2025
      If the console isn't booting up or freezes, try resetting the console to its factory default settings. If that doesn't work, use the power switch to turn the treadmill off and then on again.
  • J
    Joseph JonesAug 28, 2025
    What to do if NordicTrack NTL16119.1 Treadmill walking belt is off-center or slips?
    • P
      Philip WebbAug 28, 2025
      If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn. Also, using the hex key, turn both idler roller screws clockwise, 1/4 of a turn.
  • M
    Michelle WolfeAug 31, 2025
    How to fix NordicTrack NTL16119.1 walking belt slowing down?
    • J
      John HopkinsAug 31, 2025
      If the walking belt slows down when you walk on it, and it feels overtightened, remove the key and unplug the power cord. Then, using the hex key, turn both idler roller screws counterclockwise, 1/4 of a turn. If you suspect that the walking belt needs more lubricant or the walking belt still slows when walked on, see the front cover of this manual.
  • B
    Brandon HillSep 3, 2025
    Why incline of NordicTrack NTL16119.1 Treadmill does not change?
    • J
      Jessica BerrySep 3, 2025
      Calibrate the incline system of the treadmill.
  • H
    Hayley StricklandSep 6, 2025
    Why is my NordicTrack NTL16119.1 Treadmill walking belt slowing down when I walk on it?
    • W
      winterspeterSep 6, 2025
      The walking belt might be overtightened. To resolve this, remove the key and unplug the power cord. Using the hex key, turn both idler roller screws counterclockwise, 1/4 of a turn. The belt should be tight enough that you can lift each edge 2 to 3 inches off the platform.
  • H
    herreramargaretSep 9, 2025
    How to fix NordicTrack Treadmill walking belt that is off-center or slips?
    • D
      Daniel TownsendSep 9, 2025
      If the walking belt is off-center, remove the key and unplug the power cord. If the walking belt slips when walked on, remove the key and unplug the power cord, then use the hex key to turn both idler roller screws clockwise, 1/4 of a turn.
  • J
    Jerry YoungSep 12, 2025
    What to do if NordicTrack NTL16119.1 Treadmill power turns off during use?
    • T
      Tonya CisnerosSep 12, 2025
      Check the power switch. Ensure the power cord is properly plugged in; if it is, unplug it, wait five minutes, and then plug it back in. Also, try removing and reinserting the key from the console.

NordicTrack NTL16119.1 Specifications

General IconGeneral
BrandNordicTrack
ModelNTL16119.1
CategoryTreadmill
LanguageEnglish

Related product manuals