6
2. Connect the Extension Wire (66) to the Wire
Harness (22). Attach the Upright (2) to the Frame (1)
with four M6 x 12.7mm Button Screws (62), four M6
Split Washers (57), and four M6 Flat Washers (67).
Slide the Collar (91) onto the Upright (2). Align the
slit in the Collar with the seam between the Side
Shields (4, 5). Snap the Collar into the Side Shields.
3. Connect the Extension Wire (66) to the console wire.
Attach the Console (3) to the Upright (2) with four
Console Washers (93) and four Console Screws
(63). Snap the bookrack onto the Console as shown.
2
22
1
4
5
3
66
3
Console
Wire
Bookrack
63
93
93
93
63
2
57
67
2
91
Seam
62
57
66
67
4. Attach the Left and Right Handlebars (11, 12) to the
Seat Carriage (6) with four M6 x 35mm Screws (70)
and four M6 Nylon Locknuts (71).
4
6
12
71
11
70
To Next Page
Loading...
