Nordson EFD Performus I - User Manual

Electronic pdf files of Nordson EFD
manuals are also available at
www.nordsonefd.com
™
Performus I Dispensing System
Operating Manual

Summary

Nordson EFD Product Safety Statement

Electrical Shock Safety

Risk of electric shock. Disconnect power before servicing electrical equipment.

Manual Reading and Safety Compliance

Read manual for proper use and follow all safety instructions.

Maximum Air Pressure Limits

Maximum air input pressure is 7.0 bar (100 psi). Excessive pressure can damage equipment.

Pressure Release for Servicing

Release hydraulic and pneumatic pressure before servicing.

Burn Hazard Precautions

Avoid contact with hot metal surfaces of heated components. Wear protective gear.

Nordson EFD Product Safety Statement (continued)

Halogenated Hydrocarbon Solvent Hazards

Do not use with aluminum components due to explosion risk.

High Pressure Fluid Hazards

High pressure fluids are hazardous. Release pressure before servicing.

Personnel Qualification Requirements

Equipment must be installed, operated, and serviced by trained, qualified personnel.

Nordson EFD Product Safety Statement (continued)

Equipment Intended Use and Limitations

Use equipment only as described in documentation to prevent injury or damage.

Regulatory Compliance and Approvals

Ensure equipment is rated for the environment; follow instructions to maintain approvals.

General Personal Safety Guidelines

Follow instructions on safe operation, ventilation, handling materials, and awareness of workplace hazards.

Nordson EFD Product Safety Statement (continued)

Fire and Explosion Prevention

Follow instructions to prevent fire or explosion, especially with flammable materials.

Preventive Maintenance Checks

Recommended checks include inspecting connections, tubing, wiring, and cleaning.

Nordson EFD Product Safety Statement (continued)

Disposable Component Safety Information

Disposable components are for one-time use; re-use may compromise accuracy and safety.

Action in Case of Malfunction

Shut off system, disconnect power, and identify/correct the malfunction.

Equipment and Material Disposal

Dispose of equipment and materials according to local codes.

Specifications

China RoHS Hazardous Material Declaration

Declaration of hazardous substances in compliance with China RoHS standards.

WEEE Directive Information

Information on disposal of equipment according to the EU WEEE Directive.

Operating Features Overview

Front Panel Controls and Gauges

Explains the function of knobs, switches, and gauges on the front of the Performus I.

Rear Panel Ports and Connectors

Identifies input/output ports, power jack, and air fittings on the back of the Performus I.

Installation Guide

System Unpack and Contents

Lists items included with the Performus dispensing system.

Air Supply Connection Procedure

Instructions for connecting the air supply, including filter requirements and pressure settings.

Installation Steps

System Power Connection

Steps to connect the DC power supply to the dispensing system.

Foot Pedal and Switch Connection

Instructions for connecting the foot pedal or optional finger switch.

Syringe Barrel and Tip Attachment

How to attach a filled syringe barrel and dispense tip.

Air Output Connection

Steps to connect the air output from the adapter to the Performus.

System Setup and Operation

Dispensing System Initial Setup

Step-by-step guide for setting up the dispensing system for initial use and testing.

System Setup and Operation (continued)

Dispensing Setup Helpful Hints

Tips on adjusting dispense time, pressure, vacuum, and tip size for optimal results.

Dispensing Settings Suggestions

Guidance on reducing air pressure, avoiding high pressure settings, and allowing pressure time to work.

System Setup and Operation (continued)

Vacuum Control for Low Viscosity Fluids

How to use the vacuum feature to prevent dripping with low viscosity fluids.

System Setup and Operation (continued)

Syringe Barrel Filling Techniques

Recommends using pistons and provides guidelines for filling syringe barrels.

System Setup and Operation (continued)

Filling Procedure for Pourable Fluids

Steps for filling barrels with pourable fluids.

Filling Procedure for Thick Fluids

Methods for filling barrels with thick fluids, addressing trapped air issues.

System Setup and Operation (continued)

Alternative Syringe Barrel Filling Methods

Describes alternative filling systems like Atlas™ and luer-to-luer fittings.

Part Identification

Optional Accessories Information

Information on optional accessories to enhance dispenser performance.

Replacement Parts List

Replacement Parts List and Diagram

Lists part numbers, descriptions, and an exploded view of replaceable components.

Troubleshooting Guide

Troubleshooting Common Problems and Solutions

Table detailing common issues like no power, no fluid, inconsistent output, and material suck-back with their solutions.

Nordson EFD One Year Limited Warranty

One Year Limited Warranty Terms

Details the one-year limited warranty, exclusions, and user responsibilities.

Nordson EFD Performus I Specifications