30
Specification
NCC199-SV
Power Vented
Direct Ignition
15-150 psi
0.5 GPM
24.4"(Height) x 18.4"(Width) x 9.4"(Depth)
73 lbs.
0.5 Gallon
NPT 3/4"
NPT 3/4"
NPT 3/4"
1/2" Threaded
120 VAC (60Hz)
NG : 106W LP : 109W
Freeze Prevention 213W
Stainless Steel
Stainless Steel
Copper Sheeting, Copper Tubing
Stainless Steel Sheeting, Stainless Steel Tubing
Flame Rod, Thermal Fuse, Pressure Relief Valve,
Lightning Protection Device (ZNR),
Overheat Prevention Device, Freezing Prevention Device,
Fan Rotation Detector
Remote Controller, Remote Controller Cord,
Anchoring Screws
Specifications
Specifications
•Specifications may be changed without prior notice.
• The capacity may differ slightly, depending on the water
pressure, water supply, piping conditions, and water temperature.
Performance
Item
Model Name
Type
Ignition
Operating Pressure
Minimum Flow Rate
Dimensions
Weight
Water Holding Capacity
Connection Sizes
Accessories
Installation
Air Supply/Exhaust
Power Supply
Materials
Water Inlet
Hot Water Outlet
Gas Inlet
Condensate Drain
Supply
Consumption
Casing
Flue Collar
First Heat Exchanger
Secondary Heat Exchanger
Safety Devices
Item
Gas
Consumption
Maximum Hot Water Capacity
Capacity Range
Temperature Settings
Default Temperature Options
NG
LP
45 F Rise 8.4 Gal./min.
0.5-11.1 Gal./min.
100-150 F (In 5 F intervals),
160, 170, 180 F (In 10 F intervals) (14 Options)
120,130,140,180 F (Original is 120 F)
Maximum Performance
199,900 btuh
199,900 btuh
Minimum Performance
11,000 btuh
11,000 btuh
NCC199-DV
Indoor/ Outdoor, Wall Mounted
Indoor, Wall Mounted
NG : 115W LP : 120W
Freeze Prevention 213W
To Next Page
Loading...
