To Next PageTo Next Page
Need help?Do you have a question about the Noritz NCC199CDV and is the answer not in the manual?
General| Brand | Noritz |
|---|---|
| Model | NCC199CDV |
| Category | Water Heater |
| Language | English |
Defines hazard symbols like DANGER, WARNING, CAUTION, NOTICE for risk assessment.
Warns about explosion and fire risks from flammable liquids and vapors near the water heater.
Alerts to severe burn risks from hot water over 125°F, especially for vulnerable groups.
Provides procedures for gas leaks, abnormal combustion, and installation clearance requirements.
Covers electrical grounding, power cord handling, usage limitations, and environmental warnings like Proposition 65.
Advises on water quality, filter cleaning, scale prevention, remote controller care, and freezing prevention measures.
Identifies key components of the water heater unit with diagrams for indoor/outdoor installation.
Details the buttons and their functions on the RC-9018M remote controller.
Explains the various indicators, symbols, and displays on the remote controller screen.
Outlines the sequential steps for the initial setup and powering on of the water heater.
Provides instructions on how to set and adjust the internal clock of the remote controller.
Explains how to turn on the water heater and use hot water, with a critical scalding danger warning.
Details how to set the desired hot water temperature using the remote controller and lists available options.
Guides on setting daily schedules for automatic power ON and OFF of the water heater.
Describes how to deactivate automatic operation and provides operational tips for automated control.
Explains how to lock and unlock the remote controller to prevent accidental changes to settings.
Allows setting a maximum output temperature to prevent excessively hot water discharge.
Configures the display to save power by turning off or showing only the clock when the unit is idle.
Enables adjustment of the remote controller's screen brightness or turning off the backlight.
Describes how to mute audible tones for button presses and error alerts.
Provides instructions on how to drain water from the unit using the remote controller.
Guides on setting a flow meter alarm to indicate when a tub is full, preventing overflow.
Explains how to check the operational status of the water heater system and its components.
Details how to enable automatic recirculation based on the power status for enhanced hot water availability.
Describes the procedure for manually starting and stopping the recirculation of hot water.
Guides on setting specific daily time periods for the recirculation system to operate automatically.
Covers resetting all timer periods or canceling the recirculation timer operation.
Explains the automatic freeze prevention system and manual steps for extreme cold to protect the unit and pipes.
Provides detailed instructions for both remote controller and manual draining of the water heater for long periods of non-use.
Outlines the critical steps to safely turn the water heater back on after a period of non-use, including condensate trap filling.
Lists essential checks for safe and efficient operation, covering various components and surrounding areas.
Details how to clean the water heater exterior and remote controller using appropriate methods.
Explains how to clean the water drain valve filter and addresses water quality maintenance for optimal performance.
Discusses water quality parameters, scale build-up issues, and the service reminder for flushing the heat exchanger.
Addresses problems like the unit not igniting or failing to ignite during initial startup.
Covers common issues with the remote controller's power indicator, clock display, and alarm functions.
Diagnoses issues related to water availability, incorrect temperature, and fluctuations in hot water supply.
Addresses fluctuations in hot water temperature, insufficient volume, and flow meter alarm malfunctions.
Explains normal operating sounds, white smoke, turbid water, and other unusual occurrences.
Lists common error codes, their causes, and recommended actions to resolve them.
Guides users on how to request service, what information is needed, and details about the product warranty.
Informs about the period for stocking repair parts and considerations for reinstalling the appliance.
Explains how to check system status and introduces the concept and necessity of gas conversion.
Details the steps involved in performing a gas conversion, including kit verification and installation by qualified personnel.
Provides detailed technical specifications, dimensions, power, materials, and performance data for the water heater.
