Need help?Do you have a question about the Norsat LNB and is the answer not in the manual?
Contains critical warnings regarding equipment modifications, accessories, and AC power usage.
Explains the automatic switching mechanism based on LNB active power consumption.
Details the system architecture, including headless operation and optional IDU.
Provides crucial safety warnings before powering on and during installation.
Outlines the Ku/Ka-Band LNB installation components and required tools.
Lists components and tools for C-Band LNB installation.
Provides guidelines and a diagram for mounting the redundant switch baseplate.
Details the steps and components for installing the IFL to the ODU.
Outlines the connection steps for the optional Indoor Unit (IDU).
Explains the importance and location of safety ground connections on ODU and IDU.
Describes how the system monitors LNB current and triggers fault/warning states.
Details the Automatic and Manual Override modes of operation.
Explains the integrated ULC and power-over-IF-cable configurations.
Lists the default static IP address, Net Mask, and Gateway settings.
Provides guidance on replacing LNBs while the system is powered on.
Introduces accessing the ODU's web interface for configuration and monitoring.
Explains how the Device Info page displays system status, configuration, and readings.
Details how to configure settings like Manual Override, Active Device, and ULC.
Guides on updating IP address, Subnet, and Gateway settings via the web interface.
Explains the use of the Custom Commands page for sending strings to the RSW.
Provides steps to perform a firmware update on the RSW ODU.
Introduces the Simple Network Management Protocol (SNMP) for monitoring.
Details accessible SNMP parameters for device configuration and settings.
Explains how to use the physical manual override switch on the ODU.
Covers methods for performing a factory reset on the ODU.
Details the procedure for performing a hardware factory reset via DIP switch.
Describes the components of the IDU front panel, including screen and buttons.
Explains the function of each button on the IDU front panel for navigation and settings.
Details the meaning of the LED status indicators on the IDU for device status.
Explains how to use the manual override switch on the IDU.
Introduces the IDU's LCD display and menu navigation structure.
Describes how to navigate between the Status Page and Settings Page on the IDU LCD.
Details the default Status Page, showing device statuses and manual override state.
Explains how to view device-specific information and threshold settings on the IDU.
Lists the options available from the IDU Settings page for configuration.
Guides on viewing and changing ODU/IDU network settings via the IDU.
Details how to configure the ODU IP address through the IDU interface.
Details how to configure the IDU IP address through its own interface.
Guides on setting the subnet mask for the IDU-ODU network.
Details how to configure the gateway address for the IDU.
Explains how to select the active device and adjust threshold values on the IDU.
Describes setting the lower current limit for LNBs via the IDU.
Describes setting the lower warning threshold for LNB current via the IDU.
Describes setting the upper warning threshold for LNB current via the IDU.
Describes setting the upper current limit for LNBs via the IDU.
Explains how to configure alarm and button sound settings on the IDU.
Allows selection of the active ULC band for LNB control.
Details how to reset ODU settings to factory defaults via the IDU.
Details how to reset IDU settings to factory defaults via the IDU.
Displays Serial Numbers and Software Versions for the IDU and ODU.
Introduces the web interface for the Indoor Unit (IDU).
Provides instructions on how to access the IDU's web interface using a browser.
Explains the IDU Identification section showing Serial Number and Firmware Version.
Details how to configure network settings (IP, Subnet, Gateway) for the IDU.
Details how to configure sound settings (Alarm, Button Press) for the IDU.
Guides on updating the firmware for the IDU via the web interface.
Provides steps to resolve issues with connecting to the ODU web interface.
Offers troubleshooting steps for system power faults.
Provides troubleshooting steps for LNB power reception issues.
Recommends inspecting cables for damage as part of routine maintenance.
Suggests toggling LNBs to test system functionality monthly.
To Next Page
General