1. Press Handsfree instead of lifting handset.
Hold
Holding calls
1. Press Hold. The indicator flashes beside the line on hold.
2. Press the line key with the flashing indicator to return to the call.
Automatic hold
Calls are put on hold automatically when you switch from one line to another.
Exclusive hold
Use Exclusive hold (Feature Hold) to keep a call on hold private.
Handsfree
This key operates the telephones built-in microphone and speaker. The System Coordinator can
program Handsfree for your telephone.
Switching between handsfree and handset
1. Press Handsfree and replace the handset to switch to handsfree.
2. Pick up the handset to switch back.
Using Mute
1. Press Handsfree to turn the microphone OFF.
2. Press Handsfree again to turn the microphone ON.
Memory keys
About memory keys
Memory keys store telephone numbers or feature codes to give you one-touch dialling or feature
activation. You can change the function of a memory key by programming it with a new number or
feature.
Memory keys (with indicators) (M7310 & M7310N, M7208 & M7208N, M7324 & M7324N)
If you program a memory key with an extension number, the indicator comes on when the number is
busy.
Dual memory keys (without indicators) (M7310 & M7310N only)
To use the bottom function press the dual-memory key.
To use the top function, press the shift key, then press the dual-memory key.
To Next Page
Loading...