Nortek GHH09(2.6)LUK4DH - Electrical Wiring Connection

27
1. Align the pipe joint at the corresponding
valve.
2. Pretightening the union nut by hand.
3. Adjust the torque force by referring to the following sheet. Place the open-end
wrench on the pipe joint and place the torque wrench on the union nut. Tighten
the union nut with torque wrench.
2. After selection position of outlet pipe
eht ffo tuc esaelp ,)thgir ro tfel(
corresponding hole on the bottom
case.
cut out
the hole
left right
1. The pipe can be led out in the
right, rear right, left or
rear left of the air conditioner..
left
rear left
right
rear right
Step four: outlet pipe
Installation of indoor unit
Indoor
5-10°
outdoor
ĭ
ĭ
Note:
Ɣ7DNHDOODSSURSULDWHVDIHW\SUHFDXWLRQV
ZKHQPDNLQJSLSHKROH7U\WRDYRLG
creating as much dust as possible.
Ɣ era srohcna noisnapxe citsalp ehT
not provided and should be bought
locally.
union nutpipe joint
pipe
LQ