EasyManua.ls Logo

Nortek GMH24-36MSK4DH1 User Manual

Nortek GMH24-36MSK4DH1
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Owner's Manual
Installation Instructions
Heat Pump
Air Handlers
Models:
GMH24-36MSK4DH1
GMH48-60MSK4DH1
Please read this owner’s manual carefully before operation and retain for future
reference.
Specifications & illustrations subject to change without notice or incurring
obligations.
If you have lost the owner’s manual, please visit www.NortekHVAC.com
for electronic version.
Question and Answer IconNeed help?

Do you have a question about the Nortek GMH24-36MSK4DH1 and is the answer not in the manual?

Nortek GMH24-36MSK4DH1 Specifications

General IconGeneral
BrandNortek
ModelGMH24-36MSK4DH1
CategoryAir Handlers
Product TypeGas Furnace
Efficiency80% AFUE
Stages1
Ignition TypeDirect Spark
Dimensions (H x W x D)17-1/2 in

Summary

Safety Precautions and Warnings

General Safety Guidelines and Symbols

Covers general warnings, hazard symbols, and signal word definitions.

Specific Hazard Warnings

Addresses electrical, chemical (Prop 65), code compliance, grounding, and fire safety.

Product Introduction and Specifications

Product Overview and Accessories

Details product description, features, and optional accessories for indoor units.

Physical Dimensions and Parts

Provides unit dimensions and identifies main components with diagrams.

General Unit Information

Includes cooling capacity, heater options, motor specs, and filter size.

Dip Switch Configuration

Explains how to set indoor fan speeds using the eight dip switches.

Fan Performance Data

Presents fan speed (CFM) data across various static pressures for models.

Installation Preparations and Safety

Pre-Installation Procedures

Covers checking the unit, reading instructions, and gathering necessary tools.

Important Safety Instructions

Emphasizes recognizing and following safety symbols, words, and labels.

Air Handler Installation Guide

Unit Inspection and Model Verification

Inspects for shipping damage and verifies correct model number and sizing.

Location Selection and Clearance

Guidelines for indoor placement, service clearance, and drain pan requirements.

Piping Work and Connections

Details pipe specifications, preparation, solder, and screw connection methods.

Condensate Drainage System

Instructions for connecting the condensate drain pipe and installing a P-trap.

Ductwork Installation Standards

Covers requirements for field ductwork, insulation, and system airflow.

Electric Heater Kit Installation

Information on available heater kits and crucial installation precautions.

Electrical Installation Requirements

Specifies professional conduct, wiring, circuit breaker, and power supply guidelines.

Electrical Parameters and Wiring

Details electrical parameters, wire gauge, and connection of power/thermostat wires.

Post-Installation Checks and Trial Run

Installation Verification Checklist

Lists items to check for reliable installation, preventing issues like noise or leaks.

Trial Run Procedure

Steps for powering on, operating, and testing the unit after installation.

Troubleshooting Unit Malfunctions

Common Problems and Solutions

Provides a table of common malfunctions, their causes, and recommended treatments.

Normal Operating Circumstances

Identifies conditions that may seem like malfunctions but are normal unit operations.

Related product manuals