Nortek RC - 3.6 Replacing batteries in remote controller and notes

3DJH
User’s Manual of Remote Controller
1
）
Setting timer off
a. Pressing TIMER OFF button, OFF is blinking and time displaying zone
displays the timer time of last setting.
b. Press ▲ or ▼ button to adjust the timer time.
c. Press TIMER OFF button again to confirm setting. OFF is displayed and time
displaying zone resumes to display current time.
Press TIMER OFF button again to cancel timer and OFF is not displayed.
2
）
Setting timer on
a. Pressing TIMER ON button, ON is blinking and time displaying zone displays
the timer time of last setting.
b. Press ▲ or ▼ button to adjust the timer time.
c. Press TIMER ON button again to confirm setting. ON is displayed and time
displaying zone resumes to display current time.
Press TIMER ON button again to cancel timer and ON is not displayed.
3.5 Introduction of special functions Setting child lock
（
1
）
Setting child lock
1
）
Press ▲ and ▼ button simultaneously to lock the buttons on remote
controller and
is displayed.
2
）
Press ▲ and ▼ button simultaneously again to unlock the buttons on remote
controller and is not displayed.
3
）
If the buttons are locked, blinks 3 times when pressing the button and
any operation on the button is invalid.
（
2
）
Absence function
1
）
Press CLOCK and TEMP button simultaneously to enter absence function.
Temperature displaying zone displays 8 and
is displayed.
2
）
Press CLOCK and TEMP button simultaneously again to exit absence
function. Temperature displaying zone resumes previous display and
is
not displayed.
3
）
In winter, absence function can keep the indoor ambient temperature above
0 to avoid freezing.
Note: Absence function is only available in heating mode and it will be exited when
switching mode.
（
3
）
Setting of master mode indoor unit