Need help?Do you have a question about the Nortel 2330 and is the answer not in the manual?
General| Device Type | Wireless Access Point |
|---|---|
| Wireless Protocol | 802.11b/g |
| Frequency Band | 2.4 GHz |
| Data Rate | Up to 54 Mbps |
| Security | WEP, WPA, WPA2 |
| Antenna | Internal |
| Ethernet Ports | 1 |
| Operating Temperature | 0°C to 40°C |
Provides basic outdoor hardware installation instructions for WLAN 2300 Series.
Explains how to get technical support for Nortel products and services.
Lists FCC, Canadian IC, and other regulatory compliance notices for the access point.
Details regulatory compliance for the European Union and EFTA countries.
Outlines restrictions on operating frequency bands in European Community countries.
Specifies operating restrictions for 2.4 GHz and 5.0 GHz bands in US, Canada, EU, and EFTA.
Lists country-specific restrictions for outdoor operation of access points.
States that only Nortel-furnished antennas are intended for use with the product.
Provides caution and warning messages in multiple languages for the product.
Details critical safety warnings for powerline, high voltage, and qualified personnel.
Introduces outdoor installation for WLAN 2300 Series with indoor AP mounting.
Lists the components included in the WLAN 2300 Series Outdoor Solution with Indoor Mounted AP kit.
Covers signal path distance, attenuation, antenna polarization, and clearance for outdoor installs.
Details the required components and connection configurations for hardware setup.
Introduces the portfolio of outdoor external antennas for WLAN 2300 Series.
Describes the procedure for weather sealing outside coaxial connections using coax seal tape.
Outlines requirements for site inspection, physical site, and cable routes for installation.
Explains the need to specify the country for valid radio parameter configuration.
Details how to specify external antenna models using CLI and WMS.
Provides NEMA enclosure installation instructions for outdoor AP mounting.
Lists the components included in the kit for APs installed outdoors in a NEMA enclosure.
Details site requirements for visual inspection and planning before installation.
Specifies Ethernet cable length requirements and recommendations for connections.
Discusses antenna requirements for deployment flexibility, coverage, and performance.
Covers installation guidelines, heat/cold loading, reference info, and surge protectors.
Provides step-by-step instructions for installing the AP into an outdoor enclosure.
Details the process of installing the Ethernet lightning surge protector.
Explains how to use terminal strips for data cable connections when RJ45 jacks are unavailable.
Describes outdoor external antenna options and their relation to WSS model strings.
Explains the requirement and connection of surge suppressors for outdoor configurations.
Provides a guide to selecting outdoor external antennas for WLAN APs.
Discusses antenna properties like impedance, VSWR, radiation patterns, and gain.
Explains factors influencing WLAN system performance, including RF signal propagation.
Details specifications for 802.11a omnidirectional antennas, including gain and deployment options.
Details specifications for 802.11b/g omnidirectional antennas, including gain and deployment options.
Shows dimensions and mounting views for the Ethernet lightning surge protector.
To Next Page
