Need help?Do you have a question about the Nortel 7100 and is the answer not in the manual?
Listen to music through your telephone speaker when you are not on a call.
Check what is programmed on any button, useful for labeling buttons.
Briefly displays the approximate length of your current or most recent call.
Send your calls to another telephone in your system.
Puts a call on hold for pickup from any telephone with a retrieval code.
Answers any ringing telephone.
Answers a call ringing at another telephone in your pickup group.
Answers the next call, prioritizing incoming external calls.
Reroutes a call to another telephone even if all its lines are busy.
Changes dialing filters or gains external access by changing class of service.
Establishes a conference call between yourself and two other parties.
Adjusts the display contrast using a feature code and number.
Allows selection of three different methods for dialing numbers.
Prevents incoming calls from ringing, except priority calls.
Uses both handset and speaker for calls, avoiding electronic feedback.
Transfers a call from handset/headset to the telephone speaker.
Temporarily suspends a call.
Suspends a call and prevents other telephones from picking it up.
Automatically puts a call on hold when a second call is picked up.
Selects the primary or alternate language for the telephone display.
Automatically redials the last external telephone number that was dialed.
Allows telephones to share several lines for making calls.
Sends incoming calls on an external line to another telephone outside the system.
Generates a Link signal to access a PBX or other host exchange.
Generates a tone for as long as a button is held, for communicating with devices.
Send a message to another telephone within your system.
Changes the position of your line or hunt group buttons.
Allows the caller to not hear anything from your side of a handsfree call.
Blocks the outgoing name and/or number for a specific call.
Make a page announcement through internal or external speakers.
Programs an external autodial sequence to insert a 1.5-second delay.
Interrupts a person who is already on a call.
Changes the privacy setting for an external line to allow or prevent others joining a call.
Monitors a busy or unanswered telephone for availability.
Selects a distinctive ring to differentiate between telephones.
Adjusts the telephone's ring volume.
Stores multiple autodial numbers or feature codes on one memory button.
Saves a number to redial later.
Displays modes turned on at a designated control set.
Turns on schedules for alternative ringing/call answering arrangements.
Turns on services for restrictions on particular lines or telephones.
Turns on services for routing on particular lines or telephones.
Dials an external telephone number using a two or three-digit code.
Programs personal speed dial numbers.
Changes the first line of the display to the current time and date.
Uses system-wide call appearance buttons, depending on system setup.
Briefly displays the time and date while you are on a call.
Sends a call to another telephone within or outside your system.
Answers an external call from any telephone in the system.
Makes a voice announcement or begins a conversation through another telephone's speaker.
Prevents your telephone from receiving voice calls.
Programs an autodial number to wait for dial tone from another system.
Automatically deletes the oldest log item from a full Call Log.
Displays the name, number, or line name of a ringing or held call.
Allows viewing of call log items, including new, old, and detailed information.
Erases a specific entry from the Call Log.
Allows returning a call from the Call Log by displaying and dialing the number.
Selects the type of calls that will automatically be stored in your Call Log.
Programs a four-digit password for your Call Log.
Stores caller information for your current call in your Call Log.
Records caller information for the last external call received over ETSI ISDN lines.
Activates a display menu of feature options for IP telephones.
Sets up the Hot Desking feature to divert IP telephone configuration.
Activates the Hot Desking feature to divert calls to another telephone.
Cancels the Hot Desking feature from the active or diverted IP telephone.
Allows resetting the Hot Desking password for your telephone.
Resets the time on an IP telephone located in a different time zone.
To Next Page
General