Recovery procedures for individual devices and services 4-25
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Checking for message throughput (continued)
and pressing the Enter key.
36 Access the C7LKSET level of the MAP display by typing
>C7LKSET
and pressing the Enter key.
37 Post the linkset associated with the link that resides on the LIU7, MLIU or the
HLIU and HSLR that you just worked on by typing
>POST C linkset_name
and pressing the Enter key.
where
linkset_name
is the name of the linkset associated with the LIU7, MLIU or the HLIU
and HSLR
38 Determine if the link associated with the LIU7, MLIU or the HLIU and HSLR
that you just worked on is still out of service.
39 You restored traffic on the linkset.
Go to step 7 and choose another out of service linkset on which to work.
40 You restored traffic to the link, but the linkset is still out of service. Contact
the far-end office. Tell personnel there that you have in service or in-service
trouble links and that the associated linkset is out of service.
Go to step 7.
41 Inhibit the link from traffic flow for safety by typing
>INH link_no
and pressing the Enter key.
where
link_no
is the number of the link (0 to 15)
link_no
is the number of the link (0 to 7)
If the RTS command Do
passed step 36
failed step 54
If the link is Do
InSv or ISTb, and the linkset is InSv or ISTb step 39
InSv or ISTb, and the linkset is out of service step 40
out of service step 41
To Next Page
Loading...
