Nortel DMS-100 - Emergency Shutdown of One LIM Unit on each ELPP

Emergency power conservation recovery procedures 5-137
DMS-100 Family NA100 Recovery Procedures LET0015 and up
Emergency power conservation
Emergency shutdown of one LIM unit on each ELPP
Application
Use this procedure to conserve emergency backup power. To conserve
emergency backup power, shut down one link interface module (LIM) unit in
each enhanced link peripheral processor (ELPP) cabinet.
Action
The following flowchart is a summary of the procedure. Use the instructions
in thestep-action procedure that followsthe flowchart to performthe shutdown
task.