Do you have a question about the Nortel Enterprise 1000 and is the answer not in the manual?
Details the NTDK20FA SSC card for call processing, data storage, and network interfaces in CSE 1000.
Explains the memory architecture of the SSC card, including Flash ROM and DRAM.
Describes the function and types of 100BaseT IP daughterboards for network connectivity.
Explains the NTAK20 clock controller's role in synchronization and its tracking/free-run modes.
Details the functional blocks of the NTAK20, including PLLs and interfaces for clock synchronization.
Introduces the NT8D14 card for analog trunk interfaces and lists its supported trunk types.
Explains the card's functions, block diagram, and operational modes like loop start.
Introduces the NT8D15 E&M trunk card and its support for various trunk types and signaling.
Details signaling and call control for E&M Type I and II trunks, covering idle and call processing.
Introduces the NTAK09 DTI/PRI card and lists its key features and functions.
Covers the card's architecture, including signaling, interconnection, and microprocessor details.
Introduces the NTBK50 PRI card and lists its features, including receiver and transmitter functions.
Details the card's architecture, including DS-30X, signaling, and carrier interfaces.
Introduces the NTAK79 PRI card, its onboard DCH, and clock controller.
Details the on-board dip switch settings for DCHI, carrier impedance, and clock controller configuration.
Introduces the NTAK93 DCHI daughterboard and lists its features for ISDN PRI.
Describes the physical aspects, LEDs, power consumption, and microprocessors of the daughterboard.
Provides an overview of the NTBK51 daughterboard and lists its features for D-channel loadware.
Details the main functional blocks of the NTBK51, including memory, controllers, and timers.
Introduces the NTRB21 TMDI card as a 1.5 Mb DTI/PRI interface with downloadable D-channel.
Lists the features and functions provided by the NTRB21 card, including line coding and signaling.
Describes the hardware components of the NTRB21 TMDI card.
Introduces the NT1R20 OPS analog line card for off-premise terminals and its capabilities.
Explains the operation of the NT1R20 card, including incoming/outgoing calls and other applications.
Describes the NT8D03 analog line card, its functions, and installation in Media Gateways.
Describes the NT8D09 analog message waiting line card, its features, and compatibility.
Lists CallPilot 201i server as a supported application for the Succession CSE 1000.
Lists Optivity Telephony Manager (OTM) as a supported application.
Lists the MIXX portfolio (MICB, MICA, MIPCD, MIRAN, MIVS) as supported applications.