10
1. Operation Display
a. The display shows Time when the machine is off.
b. The display shows Temperature of the swimming pool water when the machine
is on.
2. Required pool water temperature
It can be adjusted both when the machine is on or off.
a. Press UP-ALLOW key or DOWN-ALLOW key to set to your required
pool water temperature.
b. The numbers in the LED screen will flash during your operation.
c. After five seconds, it will stop flashing and be saved, the LED screen will return
to the permanent display.
d. When you want to check the temperature, press key or to see the current
setting.
3. Time setting
It can be adjusted both when the machine is on or off.
a. Press key to set time according to your local time.Time on the LED
screen flashes.
b. Press again then press key or to set hour.
c. Before it stops flashing, press and then press key or to set
minutes.
d. After setting, press and the water temperature will appears. 30 seconds
later, it will stop flashing and the LED screen will return to the permanent
display.
To Next Page
Loading...
