11
4. Automatic on/off
This function can make the machine work or stop automatically in your required
time.
A. Time on
a. Press to set timer on.
b. When the indicator light is on and the time is flashing , press again to set
hour. Use and to adjust.
c. Before the flashing stops, press to set minute Use and to adjust.
d. After adjusting, press “TIMER ON” and water temperature will be seen. 30
seconds later, the controller display will be back to the normal mode.
B. Time off
a. Press to set timer off.
b. When the indicator light is on and the time is flashing , press again to set
hour. Use and to adjust.
c. Before the flashing stop, press to set minute Use and to adjust.
d. After adjusting, press and water temperature will be seen. 30 seconds later,
the controller display will be back to the normal mode.
C. Cancelling the automatic mode
a. Press or to cancel timer on and off.
b. When the number is flashing, press . When timer indicator light is off and
LED shows water temperature, the timer on and off is canceled.
c. 30 seconds later, the controller display will be back to the permanent display.
To Next Page
Loading...
