12
4 Transport and Storing
Take the following measures in order to transport and store the CS1 securely.
4.1 Securing for transport
Before transporting the machine:
• Remove the blade.
• Empty the water tank.
• Raise the guide-a-cut in its upright position.
• Raise the cutting frame to its highest position using the handwheel.
4.2 Transport procedure
The machine can be moved on a flat surface using its wheels. Use the metal hook located on
the board of the machine over the motor to move the machine with a crane.
4.3 Long period of inactivity
If the machine is not going to be used for a long period, please take the following measures:
• Completely clean the machine.
• Loosen the drive belts.
• Grease the threaded shaft.
• Possibly change the motor oil.
• Empty the water system.
The storage site must be clean, dry and at a constant temperature.
To Next Page
Loading...
