Nortrac 40XTD - Page 21

Page 21 / 48
Turn the water-trap tap semi-open.
Put the gearshift and PTO handle in the neutral position.
Insert the key into the start-up ignition.
Cautions During Start-up
⚠CAUTION
• To prevent property damage, do not leave key in “H” position for more than 15 seconds.
• Keep the engine at idle speed of about 600r/min for several minutes after start-up.
• In cold weather, in order to ensure the engine is easy to start-up, before start-up, the coolant hose
heater needs to be connected to the external power supply. Unplug when ready to use.
Water-trap
Located on the
lower left side
of the diesel
engine.