Safety Precautions
6
9. When detaching the tractor from any implements, the upper lever of the suspension unit should
be adjusted to the shortest travel and the limit lever adjusted to prevent the implements from
swinging out of control. The locking nuts on the upper and limit levers must be tighten in order
to guarantee travel safety and to avoid damage to the tractor and the machinery.
1.2 Safety Warning Symbols
Caution:
1. All safety identifiers should be visible and easy to read. When dirty, wash with soapy water and clean them
with a soft rag.
2. When the safety identifiers are lost or damaged, contact the sales department or the manufacturer for
replacement stickers.
3. When replacing parts with attached Safety warning symbols,
the safety identifiers that correspond to that
specific part need to be updated as well.
4.
To prevent injury, accidents and damage, always comply with safety warning identifiers.
During machine operation, keep a safe distance from the hot surface of the
machine, as it can cause serious burns. Post position: outer side of damper,
water tank flank.
Fig. 1-10 Safety warning identifier IX
Please keep a safe distance from the tractor when it operating, to avoid
any personal injuries.
Post position: left from the rear side of mudguard.
Fig. 1-11 Safety warning identifier IX
To Next Page
Loading...
