NOVA BIOMEDICAL StatStrip Xpress-i User Manual

17
Setup
This section describes how to setup the Nova StatStrip
Xpress-i Glucose and ß-Ketone Hospital Meter. The operator
can set the meter for local time and date, have the beeper On
or Off, enable the sample counter, and set the date display
format.
Installing the Battery (Replacing)
The meter is powered by a single 3V coin cell battery, 2450.
Install/Replace the battery as follows:
1. Remove the back battery cover
on the meter.
2. Install the coin cell battery with
the + side facing up. (If replacing
the battery, remove the used bat-
tery and replace with a new one.)

NOVA BIOMEDICAL StatStrip Xpress-i Specifications

General

Brand	NOVA BIOMEDICAL
Model	StatStrip Xpress-i
Category	Blood Glucose Meter
Language	English