INFINITY Quick Change
Note that Inserts, accessory jaws etc are fully interchangeable between the NOVA Infinity, Nova, SuperNova, Titan
II and SuperNova2 Chucks. However, additional Retro Fit Kit (SKU 8200) will need to be purchased to use your
old NOVA chuck accessory jaws on the new NOVA Infinity Quick Change Jaw Slides.
ONLY USE GENUINE NOVA CHUCKS, NOVA PARTS AND ACCESSORIES. USE OF ANY OTHER CHUCK
BRANDS OR PARTS ON OTHER CHUCK BRANDS MAY BE UNSAFE AND WILL VOID WARRANTY.
UPGRADE KIT
SKU 8100
Kit containing 4 Infinity Jaw Slides, enabling you to replace your old existing NOVA chuck jaw slides (Precision
Midi, G3, SuperNOVA2 with the Infinity quick change technology, giving you access to Quick Change technology
and all the exciting NOVA Infinity Quick Change Accessory Jaws.
SKU 8120
As above but for specifically for the NOVA Titan II Chuck.
RETRO FIT KIT
SKU 8200
Kit containing 4 jaw insert pieces, fitted to your Infinity Jaw slides, it enables you to fit your existing older NOVA
chuck accessory jaws to the Infinity jaw slides.
ACCESSORY JAWS
NOVA Infinity is a new system which offers innovative breakthroughs for chuck holding.
A quick change jaw key system fits to the Infinity Slides (patent app.) to form a powerful and secure ‘taper lock’
much stronger than the original jaw screw fastening system. Delivers more powerful holding with the big advantage
of jaws that can be changed out in less than 30 seconds.
The Infinity system also allows complete freedom in jaw design with no screw fastenings to limit jaw function.
The NOVA Innovation team were able to take a fresh look at jaw holding to help the woodturner to select the
appropriate jaw to enable the just the right shape and design for their work, no matter the size. A ‘freedom to
design’ was not possible with the original jaw series.
The Infinity jaw series approach is based around workholding solutions in areas such as bowl turning, spigot/tenon
turning, hollow forms, available in Bowl, Saw Tooth and Smooth Column Series.
CHUCKS
There are several models of the SuperNOVA2 Infinity Quick Change Chuck designed to meet various woodturning
requirements. Note that inserts, accessory jaws etc are fully interchangeable between the NOVA Infinity, Nova,
SuperNova, Titan, G3 and SuperNova2 Chucks. However, an Retro Fit (SKU 8200) will need to be purchased.
120-0913-009 7
To Next Page
Loading...
Need help?
General