Nova Lock&Load

OPERATING PROCEDURE continued
NOVA Lock & Load
TM
Owner’s Manual
6
RESTRAIN Button Pressed -
Restraint ENGAGING
Trailer has backed into loading dock and is
parked firmly against dock bumpers. Hook
rotates from stored position to engage RIG.
Outside light is flashing red alerting truck driver
not to move. Refer to Figure C.
If horn sounds, proceed to FAULT, otherwise
proceed to Restraint ENGAGED.
If trailer can not be restrained due to a lift
gate or other obstruction that could become
damaged, proceed to OVERRIDE.
!
CAUTION
Restraint ENGAGED
Once the RIG is engaged by the hook, an
ENGAGED condition exists. Inside light is flash-
ing green alerting the forklift operator a safe con-
dition exists. Outside light is flashing red alerting
truck driver not to move. Refer to Figure D.
If during loading/unloading the inside light turns
red and the horn sounds, press RESTRAIN
button to secure the RIG.
Visually inspect to ensure that the Lock &
Load vehicle restraint hook securely engages
the RIG of the trailer before operating the
dock leveler.
!
WARNING
FIGURE D—RESTRAINT LOCKED
FIGURE C—RESTRAINT LOCKING