NovaStar VX400 - Input Settings

VX400 All-in-One Controller User Manual
www.novastar.tech
18
Figure 5-15 Opacity
Input Settings
On the main menu screen, rotate the knob to select Input Settings and press the knob to enter the input
source screen.
Figure 5-16 Select input source
5.4.1 Set Input Resolution
The VX400 provides the HDMI, DVI and 3G-SDI (optional) input connectors.
When a DVI or HDMI input source is output by a graphics card, the resolution settings are supported. The
following two methods are provided to set the input resolution:

Standard resolution

Custom resolution
Note:
The SDI input source does not support resolution settings.
Standard Resolution
Step 1 On the input settings screen, select the desired input source and press the knob to enter the input resolution
settings screen.
XI'AN NOVASTAR TECH CO., LTD.