Need help?Do you have a question about the Novatel MT3060 and is the answer not in the manual?
Details the MT 3060's design, rugged housing, and features for telematics markets.
Lists general, radio, packet data, and environmental specifications for the MT 3060 device.
Explains how the MT 3060 monitors vehicle OBDII systems and configurable events.
Outlines GPS functions including NMEA updates, binary packets, buffered messages, and geo-fencing.
Describes the function of the MT 3060's OBD, GPS, Network, and Bluetooth LEDs.
Details the MT 3060's power requirements, connector pinout, and battery notes.
Explains the purpose and configuration of the MT 3060's rechargeable lithium-ion backup battery.
Covers the digital and analog accelerometer features for motion and impact detection.
Describes the MT 3060's quad-band GSM radio capabilities and classes.
Details configurable events like VIN, engine speed, vehicle speed, battery voltage, and idle time.
Explains how to send AT commands via SMS for data logging and time synchronization.
Guides users on installing the SIM card into the MT 3060 device.
Provides instructions for activating the CDMA 1xRTT version of the MT 3060.
Details the hardware installation of the MT 3060 into a vehicle's OBDII socket.
Explains the automatic accelerometer calibration sequence on the first drive.
Outlines terms of use for new materials and limits liability for Novatel Wireless.
Details the limited warranty terms, coverage, and procedures for Novatel Wireless products.
Covers FCC, RF Exposure, Industry Canada, R&TTE, and RoHS compliance for the device.
Lists precautions and safety requirements for handling and using the device's battery.
Details the MT 3060's design, rugged housing, and features for telematics markets.
Lists general, radio, packet data, and environmental specifications for the MT 3060 device.
Explains how the MT 3060 monitors vehicle OBDII systems and configurable events.
Outlines GPS functions including NMEA updates, binary packets, buffered messages, and geo-fencing.
Describes the function of the MT 3060's OBD, GPS, Network, and Bluetooth LEDs.
Details the MT 3060's power requirements, connector pinout, and battery notes.
Explains the purpose and configuration of the MT 3060's rechargeable lithium-ion backup battery.
Covers the digital and analog accelerometer features for motion and impact detection.
Describes the MT 3060's quad-band GSM radio capabilities and classes.
Details configurable events like VIN, engine speed, vehicle speed, battery voltage, and idle time.
Explains how to send AT commands via SMS for data logging and time synchronization.
Guides users on installing the SIM card into the MT 3060 device.
Provides instructions for activating the CDMA 1xRTT version of the MT 3060.
Details the hardware installation of the MT 3060 into a vehicle's OBDII socket.
Explains the automatic accelerometer calibration sequence on the first drive.
Outlines terms of use for new materials and limits liability for Novatel Wireless.
Details the limited warranty terms, coverage, and procedures for Novatel Wireless products.
Covers FCC, RF Exposure, Industry Canada, R&TTE, and RoHS compliance for the device.
Lists precautions and safety requirements for handling and using the device's battery.
General| Model | MT3060 |
|---|---|
| Manufacturer | Novatel |
| GPS L1 Frequency Support | Yes |
| Update Rate | 1 Hz |
| Velocity Accuracy | 0.1 m/s |
| Interface | RS-232 |
| Data Protocol | NMEA 0183 |
| Operating Temperature | -40°C to +85°C |
| Type | GPS Receiver |
| Frequency | L1 (1575.42 MHz) |
| Position Accuracy | 2.5 meters |
| Accuracy | <2.5 m CEP |
| Cold Start | 30 seconds |
| Reacquisition | <1 s |
| Acquisition Time (Hot Start) | <1 s |
To Next Page
