Delay
RATIO Menu
The V-Station’s delay effect is actually a stereo delay and it is possible to set different delay
times on the left and right audio outputs. The RATIO menu allows you to select the ratio of the
longest delay time and the shorter delay time into timings that are musically useful. The
following ratios are available:
1/1
4/3
3/4
3/2
2/3
2/1
1/2
3/1
1/3
4/1
1/4
1/OFF
OFF/1
Left / Right
Delay Ratios
A simple, equal 1 to 1 ratio is the first entry in the table. This setting sends a delay of equal time
to the left and right output channels. The number in the left column of the table indicates the
ratio of the delay time that will be in the left channel versus the number in the right column.
For example, if a delay of twice the time is required in the left channel compared to the right,
select the 2/1 option. The final 1/OFF and OFF/1 options will result in no delay being heard in
the channel indicated by the ‘OFF’.
Note: Selecting a 1/1 ratio will produce a mono effect regardless of the stereo WIDTH setting
since the timing of the echos are equal.
41 MAIN panel / Operation
To Next Page
Loading...