Panning
INIT POS Menu
As well as being able to be synchronised to a MIDI clock (tempo), the panning LFO may have its
initial position set after a specific MIDI event is received.
The initial positions are shown in the screen shot above. For example, if the panning initial
position sync is set to RIGHT (Right), after an appropriate MIDI event has been received, the
sound will begin in the right output audio channel and then move towards the left. If set to
CENTRE, the panning will start at the centre, move to the left then back to the right and then to
the centre, etc.. If set to OFF, the panning will be ‘free-running’ for every note.
Note : The panning LFO should not be confused with the two LFOs available on the
V-Station’s MAIN panel.
53 MAIN panel / Operation
To Next Page
Loading...