8
Carefully unpack the system and inspect each item for any damage that may have occurred during transit and
handling. Any damage or missing components should be reported to Novis Healthcare as soon as possible.
System Preparation
Confi rm there are no sharp objects in the
immediate area which may risk damage to the
mattress replacement.
1
Re m ov e y ou r ex is ti ng m at tr es s a nd pl ac e
the mattress replacement on top of your
bed – printed top cover facing upwards and
umbilical cord towards the base of the bed.
2
Attach to the bed by securing the adjustable
straps, located on the underside of the
mattress base under each bed end. On a
profi ling bed, secure the straps around the
moveable sections of the base. Ensure the
buckles are securely fastened and straps
are pulled tight.
Do not secure mattress straps to bed side rails
– straps will tear.
Ensure that straps do not interfere with the
operation of the bed, and that the mattress is
properly secured. Failure to do so could result
in patient injury or equipment damage.
3
Check CPR sealing valve is closed – the
turning tab and the arrows must be aligned to
‘CLOSED’ position.
UMBILICAL CORD
BED BASE
“Sealed Mattress Base CPR”
To Next Page
Loading...
