Chapter1 Introduction
Manual of NVEM
- 2 -
can support 3-6 axis stepper systems,200KHz pulse output for every axis；
ARM motion control chip；
main device is 12V-32VDC power supply input,current should higher than 0.5A；
Compatible with MPG input,support the digital display MPG from our company。
1.3 Products Appearance and size
NVEMV2.1 motion controller is with the sealed shell structure,there are 4pcs setting holes
at the bottom.We can fix 4pcs 4mm diameter holes at the cabinet,and install the controller into
the cabinet.The controller appearance as the Figure 1-1 and Figure 1-2 show:
The products overall size is 163.1mm*80.8mm*27.8mm
；
The bottom install size is 101.4mm*39.5mm
。
Figure1-1. NVEMV2.1 front appearance and size
To Next Page
Loading...
