4
Safety Information
WARNING! Use of controls or adjustments other than those specified herein may result in
hazardous radiation exposure.
The OLS1 optical light source is a CLASS I LED PRODUCT.
The OLS2 optical light source is a registered CLASS I LASER PRODUCT.
The OLS4 optical light source is a registered CLASS I LED and LASER PRODUCT.
The OLS7 optical light source is a registered CLASS I LASER PRODUCT.
WARNING! To avoid the danger of fire and electrical shock:
• NeveruseavoltagethatisdifferentfromthatforwhichtheACadapterisrated.
• Donotplugtheunitintoapoweroutletthatissharedbyotherdevices.
• Nevermodifythepowercordorexcessivelybend,twist,orpullit.
•Donotallowthepowercordtobecomedamaged.Donotplaceheavyobjectsonthepower
cord or expose it to heat.
•NevertouchtheACadapterwhileyourhandsarewet.
•Shouldthepowercordbecomeseriouslydamaged(internalwiringexposedorshorted),
contact the manufacturer to request servicing.
WARNING! Use only the specified AC adapter. Use of another type of AC adapter can damage
the instrument and create the danger of fire and electrical shock.
CAUTION! To avoid serious eye injury, never look directly into the optical outputs of fiber optic
network equipment, test equipment, patch cords, or test jumpers. Always assume that optical
outputs are on.
NOTICE! Noyes power meters and light sources contain no user serviceable parts. Except
for changing batteries and cleaning optical ports, these units must be returned to Noyes or
authorized agents for repair and calibration.
IMPORTANT! Proper care in handling should be taken when using any precision optical test
equipment. Scratched or contaminated optical connectors can impact the performance of the
instrument. It is important to keep the dust caps in place when the unit is not being used.
!
!
!
!
!
To Next Page
Loading...
Need help?
General
