NRI G-13.mft MDB/S1 - User Manual

Technical Documentation
National Rejectors, Inc. GmbH • Zum Fruchthof 6 • D-21614 Buxtehude
Phone: +49 (0)4161-729-0 • Fax: +49 (0)4161-729-115 • E-mail: info@nri.de • Internet: www.nri.de
CRANE
07.04 Hns/ds
Edition 1.0
BA.G13MFTMDBS1-GB
Electronic coin validator
G-13.mft MDB/S1 (from model /4 on)
Operating instructions

Summary

Safety Instructions

Proper Use

Specifies the intended use and general safety precautions for the coin validator.

Protecting Yourself and Equipment

Details safety measures related to electrical connections, ESD, and handling.

Design

Switching blocks

Switch assignment with double block data-management (B-0 and B-1)

Switch assignment with single block data-management

Interfaces

Outlines the physical interfaces for connectivity to vending machines and other devices.

Interface - vending machine

Describes the connection and communication with the vending machine.

Interface - configuration (WinEMP;PalmEMP2)

Details the interface for PC or Palm handheld configuration.

Function

Coin acceptance and coin rejection

Explains the process of coin validation, acceptance, and rejection.

Coin channels

Single or double block data-management

Starting up

Starting up in the vending machine

Step-by-step guide for installing the validator in a vending machine.

Device environment for configuration software (WinEMP)

Details the PC setup required for configuring the validator with WinEMP.

Connection to Palm handheld (PalmEMP2)

Explains how to connect and configure the validator using a Palm handheld.

Operation

Inhibit coin channels

Methods to disable specific coin channels or types using DIL switches or software.

Teach mode

Procedures for teaching new coin types or adjusting acceptance bands via DIL switches.

Switch assignment with double block data-management (in teach mode)

Switch assignment with single block data-management (in teach mode)

Teach coin channels

Step-by-step guide for teaching new coin types to the validator.

Select memory block (only for double block data-management)

Technical data

Pin assignment and connection diagrams

G-13.mft - vending machine

Specific pin assignments and interface details for vending machine connection.

Commands, status and error messages

Lists MDB/S1 protocol commands and status/error codes for diagnostics.

Configuration software

Information on WinEMP and PalmEMP2 software for configuration and diagnostics.

NRI G-13.mft MDB/S1 Specifications

General

Brand	NRI
Model	G-13.mft MDB/S1
Category	Cash Counters & Coin Sorters
Language	English